MPN: OEP30-157
This paper outer air filter is used with Oregon 30-158, has a length of 10-3/4" and replaces Kawasaki. Many parts look similar, so it’s crucial to ensure you’re choosing the...
MPN: OEP07-213
This in-tank fuel filter for 3/16" fuel line is 30 micron. This replaces Husqvarna. Oregon replacement parts are built to meet or exceed OEM standards. Many parts look similar, so...
MPN: OEP33-742
This electric starter motor replaces Kohler. Oregon replacement parts are built to meet or exceed OEM standards. Many parts look similar, so it’s crucial to ensure you’re choosing the right...
MPN: OEP33-713
This electric starter motor replaces Tecumseh. When used to replace a four bolt mount starter, 2 new screws are required (included). Many parts look similar, so it’s crucial to ensure...
MPN: OEP33-152
This ignition switch is 6 terminal, 3 position and requires a 5/8" mounting hole. Oregon replacement parts are built to meet or exceed OEM standards. Many parts look similar, so...
MPN: OEP33-394
This ignition switch is for Magnum engines and Magneto units and replaces Kohler. Oregon replacement parts are built to meet or exceed OEM standards. Many parts look similar, so it’s...
MPN: OEP33-392
This ignition switch is for front engine riding mowers and replaces Murray. Oregon replacement parts are built to meet or exceed OEM standards. Many parts look similar, so it’s crucial...
MPN: OEP33-383
This is an ignition switch with a seven post switch for engines equipped with fuel shut-off and solenoid build 1994 or newer. This switch includes a key. Many parts look...
MPN: OEP83-300
A premium Oregon OEM replacement part to remove contaminants from transmission oil and give you a smooth ride every time. Many parts look similar, so it’s crucial to ensure you’re...
MPN: OEP45-260
This magnum ball bearing has an outer diameter of 1.375 and an inner diameter of 0.625. Oregon replacement parts are built to meet or exceed OEM standards. Many parts look...
MPN: OEP33-735
This electric starter motor replaces Honda and does not include a solenoid. Oregon replacement parts are built to meet or exceed OEM standards. Many parts look similar, so it’s crucial...
MPN: OEP45-263
This magnum ball bearing has an outer diameter of 2.046" and an inner diameter of 1.0". Oregon replacement parts are built to meet or exceed OEM standards. Many parts look...
MPN: OEP07-160
This in-line fuel filter for a 1/4" or 5/16" fuel line is 80 micron. Oregon replacement parts are built to meet or exceed OEM standards. Many parts look similar, so...
MPN: OEP45-010
This flanged wheel bearing fits Toro wheel 37797 for an electric gas snow blower and Oregon 72-780. This bearing replaces Snapper and Grasshopper. Many parts look similar, so it’s crucial...
MPN: OEP45-207
This ball bearing is for Turfcat 72 models and replaces Jacobsen. Oregon replacement parts are built to meet or exceed OEM standards. Many parts look similar, so it’s crucial to...
MPN: OEP33-431
This solenoid is a 4 post, dual mounting bracket with the external ground including spade converters. This has 200 amp capacity. Many parts look similar, so it’s crucial to ensure...
MPN: OEP69-347
This blister pack contains one paper air filter for Honda walk-behind mowers. Oregon replacement parts are built to meet or exceed OEM standards. Many parts look similar, so it’s crucial...
MPN: OEP31-051
This complete recoil starter is for most engines (1998 and older) and fits all Snow King applications. Many parts look similar, so it’s crucial to ensure you’re choosing the right...
MPN: OEP50-646
This carburetor replaces manufacturing numbers 1107 and 1159 and fits Tecumseh. Oregon replacement parts are built to meet or exceed OEM standards. Many parts look similar, so it’s crucial to...
MPN: OEP45-258
This flanged wheel bearing has an outer diameter of 1-3/8" and inner diameter of 5/8". Oregon replacement parts are built to meet or exceed OEM standards. Many parts look similar,...
MPN: OEP49-020
This primer bulb is .55" in height and replaces Walbro. Oregon replacement parts are built to meet or exceed OEM standards. Many parts look similar, so it’s crucial to ensure...
MPN: OEP33-430
This solenoid is a 3 post, dual mounting bracket with the external ground including spade converters. This has 200 amp capacity. Many parts look similar, so it’s crucial to ensure...
MPN: OEP33-795
This electric starter motor replaces Kawasaki. Oregon replacement parts are built to meet or exceed OEM standards. Many parts look similar, so it’s crucial to ensure you’re choosing the right...
MPN: OEP07-137
FILTER, FUEL Many parts look similar, so it’s crucial to ensure you’re choosing the right replacement for your original equipment or engine model. Not sure? Use our Parts Lookup Tool...
We get it, fixing outdoor power equipment can be hard, but finding the right part is easier with our Part Lookup Tool.
MPN: OEP55-610
This air filter replaces Homelite. Oregon replacement parts are built to meet or exceed OEM standards. Many parts look similar, so it’s crucial to ensure you’re choosing the right replacement...
MPN: OEP07-109
This in-tank fuel filter is for 1/4" fuel lines on chainsaw models. Oregon replacement parts are built to meet or exceed OEM standards. Many parts look similar, so it’s crucial...
MPN: OEP07-154
This Tygon fuel line is 1/16" inner diameter and a 50' box. Tygon fuel lines are compatible with up to 10% Ethanol blend fuels. Many parts look similar, so it’s...
MPN: OEP07-127
This Oregon 07-126 grommet includes 8" sections of fuel line (3) and replaces Echo 132115-46730. Oregon replacement parts are built to meet or exceed OEM standards. Many parts look similar,...
MPN: OEP07-151
This Tygon fuel line is 1/8" and 50' in length. Tygon fuel lines are compatible with up to 10% Ethanol blend fuels. Many parts look similar, so it’s crucial to...
MPN: OEP07-157
This Tygon fuel line is 1/8" and 25' in length. Tygon fuel lines are compatible with up to 10% Ethanol blend fuels. Many parts look similar, so it’s crucial to...
MPN: OEP33-401
This voltage regulator is for 8-24 HP engines and has 15 amp alternator, in-line terminals. Oregon replacement parts are built to meet or exceed OEM standards. Many parts look similar,...
MPN: OEP07-261
Oregon fuel line is a specially formulated gas and oil vinyl tubing that is made for use with lawn mowers, chainsaws and snowmobiles. This fuel line maintains an air tight...
MPN: OEP07-255
Oregon fuel line is a specially formulated gas and oil vinyl tubing that is made for use with lawn mowers, chainsaws and snowmobiles. This fuel line maintains an air tight...
MPN: OEP07-257
Oregon fuel line is a specially formulated gas and oil vinyl tubing that is made for use with lawn mowers, chainsaws and snowmobiles. This fuel line maintains an air tight...
MPN: OEP07-133
This in-tank fuel filter has an outer diameter of 3/4", length of 1-3/4" and replaces Stihl. Oregon replacement parts are built to meet or exceed OEM standards. Many parts look...
MPN: OEP07-210
This fuel filter is 175 micron, for 3/16" fuel line and should be used on larger CC engines. Oregon replacement parts are built to meet or exceed OEM standards. Many...
MPN: OEP07-104
This in-line fuel filter is 10 micron, has a 5/16" nipple and replaces Kubota. Oregon replacement parts are built to meet or exceed OEM standards. Many parts look similar, so...
MPN: OEP07-209
This in-tank fuel filter fits 1/8" fuel lines, is 175 micron and replaces Zama. Oregon replacement parts are built to meet or exceed OEM standards. Many parts look similar, so...
MPN: OEP07-110
This in-line fuel filter is for 5/16" fuel line and is 80 micron. Oregon replacement parts are built to meet or exceed OEM standards. Many parts look similar, so it’s...
MPN: OEP07-211
This fuel filter from Oregon fits 1/4" fuel lines, is used with larger CC engines and replaces Zama ZF5. Many parts look similar, so it’s crucial to ensure you’re choosing...
MPN: OEP33-348
This ignition coil is for a solid state module and replaces Honda. Oregon replacement parts are built to meet or exceed OEM standards. Many parts look similar, so it’s crucial...
MPN: OEP33-397
A 3-position ignition switch with a five spade terminal for magneto ignition. This switch comes with a key and fits many models. Many parts look similar, so it’s crucial to...
MPN: OEP33-093
This universal PTO switch has a push-pull snap mount and is for 8 terminal. Oregon replacement parts are built to meet or exceed OEM standards. Many parts look similar, so...
MPN: OEP60-108
This zone safety control cable is for walk-behind mowers and replaces AYP. Oregon replacement parts are built to meet or exceed OEM standards. Many parts look similar, so it’s crucial...
MPN: OEP30-709
This paper air filter is for SX series, Harmony 215 and Model HRM215 motors and should be used with Oregon 30-932 foam pre-cleaner. Many parts look similar, so it’s crucial...
MPN: OEP33-398
This ignition switch has a 6 spade terminal, is 3 position and replaces John Deere. Oregon replacement parts are built to meet or exceed OEM standards. Many parts look similar,...
MPN: OEP33-333
This ignition coil is for 6-16 HP engines and fits single-cylinder engines with battery ignitions. Oregon replacement parts are built to meet or exceed OEM standards. Many parts look similar,...
MPN: OEP30-347
This paper air filter is for walk-behind mowers and replaces Honda. Oregon replacement parts are built to meet or exceed OEM standards. Many parts look similar, so it’s crucial to...
