MPN: OEP30-704
These high-quality air filters from Oregon are manufactured to exact OEM tolerances on width, height, and length to ensure a perfect fit in the filter canister. All air filters are...
MPN: OEP07-602
This fuel tank is crafted for Honda models. Oregon replacement parts are built to meet or exceed OEM standards. Fuel tank Replaces Honda with code 3713278 Fits GX360, GX390, and...
MPN: OEP49-027
This primer bulb is for HDA series carburetors and replaces Walbro. Oregon replacement parts are built to meet or exceed OEM standards. Outer diameter: .725", Height: .60" Replaces Walbro For...
MPN: OEP31-051
This complete recoil starter is for most engines (1998 and older) and fits all Snow King applications. Complete recoil starter For most engines (1998 and older) Replaces Tecumseh Fits all...
MPN: OEP30-024
This paper air filter should be used with Oregon 30-525 or 30-024 foam pre-cleaner and replaces Tecumseh. Use with Oregon® 30-525 or 30-925 foam pre-cleaner Fits OHV110, OHV115, OHV120, OHV12,...
MPN: OEP83-301
This engine oil filter is 27 micron, includes an anti-drain back valve and fits Honda, John Deere, Kubota, Troy Bilt and Yanmar. Fits GX60KI For water-cooled engines on tractor models...
MPN: OEP30-436
This paper air filter is for 20 HP engines and should be used with Oregon 30-455 foam pre-cleaner. Oregon replacement parts are built to meet or exceed OEM standards. Oregon...
MPN: OEP30-333
This air filter kit fits cut-off saws and replaces Stihl. Oregon replacement parts are built to meet or exceed OEM standards.Genuine Oregon premium qualityWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.govThis...
MPN: OEP30-705
This paper air filter is 7-3/8" in length, 3-3/8" in width and 2-3/8" in height. This replaces Kawasaki. Paper Pleated Air Filter 7 3/8" X 3 3/8" X 2 3/8"...
MPN: OEP60-028
This Throttle Control Cable works with Kawasaki engines. Oregon replacement parts are built to meet or exceed OEM standards. Wire travel: 1-1/2'' Z-bend on one end Innerwire diameter: 060'' WARNING:...
MPN: OEP33-348
This ignition coil is for a solid state module and replaces Honda. Oregon replacement parts are built to meet or exceed OEM standards. Ignition coil Solid state module Replaces Honda...
MPN: OEP49-230
Use this high quality Oregon part to service carburetors and keep your equipment running all season. Oregon replacement parts are built to meet or exceed OEM standards. Replaces Tecumseh 632347...
MPN: OEP43-425
Ensure your outdoor power equipment operates at peak performance with OEM high-quality replacement parts. Known for their durability and precision, These parts are designed to meet the rigorous demands of...
MPN: OEP49-237
Use this high quality Oregon part to service carburetors and keep your equipment running all season. Oregon replacement parts are built to meet or exceed OEM standards. Replaces Tecumseh part...
MPN: OEP45-225
This magnum ball bearing is for a spindle assembly for 30", 40" and 50" ZTR chain drives. Oregon replacement parts are built to meet or exceed OEM standards. Outer diameter:...
MPN: OEP49-443
This primer bulb carburetor part is for chainsaw models and replaces Poulan. Oregon replacement parts are built to meet or exceed OEM standards. For chain saw models Replaces Poulan 530071835...
MPN: OEP30-943
This pre-cleaner replacement is for Kohler 12-083-12. Oregon replacement parts are built to meet or exceed OEM standards. Pre oiled foam pre-cleaner Measurements: Length: 6-3/8''; Width: 3-1/4'' Use with Oregon...
MPN: OEP49-884
This diaphragm and gasket kit fits C1Q carburetors on Husqvarna and Jonsered. Oregon replacement parts are built to meet or exceed OEM standards. Includes hardware Replaces Zama GND-33 and GMD-39...
MPN: OEP33-213
This spark plug boot has a 45 degree angle and fits Husqvarna brushcutter models 232, 235 and 322. Oregon replacement parts are built to meet or exceed OEM standards. High...
MPN: OEP83-012
This transmission oil filter is for Groundsmaster 300 series commercial mowers and Pro Line commercial mowers and is 10 micron. Height: 5-1/4", Outer diameter: 3-11/16", Seal outer diameter: 2-3/4" For...
MPN: OEP50-650
This carburetor replaces Tecumseh. Oregon replacement parts are built to meet or exceed OEM standards.Replacement Tecumseh CarburetorReplaces Rotary - 13149WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.govThis part fits:Rotary - 13149,...
MPN: OEP30-318
This paper air filter has a foam pre-cleaner and replaces Honda. Oregon replacement parts are built to meet or exceed OEM standards. Fits GX110, GX120KI, 4 HP and series 400...
MPN: OEP07-390
This Oregon fuel fitting is for MTD and others, it measures 1-1/8" X 1-1/16" and can be used with the Oregon 07-392 fuel tank bushing. It replaces MTD 751-3054 model....
MPN: OEP31-117
This recoil starter fits model LH195SA and has a winter pulley. Oregon replacement parts are built to meet or exceed OEM standards. Replacement for OEM# Tecumseh 590787 Used on model...
We get it, fixing outdoor power equipment can be hard, but finding the right part is easier with our Part Lookup Tool.
MPN: OEP31-260
This spool of premium nylon rope is 200' in length and used for starter ropes. Oregon replacement parts are built to meet or exceed OEM standards. Premium braided, nylon rope...
MPN: OEP31-116
This recoil starter for lawn mowers replaces Tecumseh models and includes a winter pulley. Oregon replacement parts are built to meet or exceed OEM standards. Replaces Tecumseh Recoil starter Includes...
MPN: OEP30-117
High quality air filters from Oregon manufactured to exact OEM tolerances on width, height, and length to ensure a perfect fit in the filter canister. All air filters are made...
MPN: OEP30-740
This paper air filter is for 4 and 5 HP engines and replaces Tecumseh. Oregon replacement parts are built to meet or exceed OEM standards. Length: 3-3/8", Width: 3-3/4", Height:...
MPN: OEP07-062
This in-line fuel filter is for 1/4" fuel lines and replaces Kawasaki. Oregon replacement parts are built to meet or exceed OEM standards. In-line fuel filter For 1/4" fuel line...
MPN: OEP45-220
This Oregon magnum ball bearing is a replacement for reference number 6305-2RS. Oregon replacement parts are built to meet or exceed OEM standards. Magnum ball bearing Refernce number 6305-2RS This...
MPN: OEP30-054
This paper air filter is not for internally vented carburetors and replaces Kawasaki. Oregon replacement parts are built to meet or exceed OEM standards. Use with Oregon® 30-527 foam pre-cleaner...
MPN: OEP60-209
This throttle control cable has a plain end with no z-bend. Oregon replacement parts are built to meet or exceed OEM standards. Plain end with no z-bend Wire travel: 1-3/8"...
MPN: OEP30-405
High quality air filters from Oregon manufactured to exact OEM tolerances on width, height, and length to ensure a perfect fit in the filter canister. All air filters are made...
MPN: OEP50-638
This carburetor fits Honda model GX390 with BE85B carburetors. Oregon replacement parts are built to meet or exceed OEM standards. Complete carburetor Fits Honda model GX160 with BE65B carburetors Fits...
MPN: OEP07-075
This fuel line from Oregon fits 021, 023 and 025. Replaces Stihl 1123-358-7701. Oregon replacement parts are built to meet or exceed OEM standards. Genuine OEM Oregon Product Made in...
MPN: OEP31-252
This premium braided nylon rope is used for replacement starter rope. Oregon replacement parts are built to meet or exceed OEM standards. 200' length Premium braided nylon rope #5-1/2, 11/64"...
MPN: OEP07-200
This fuel filter fits most saws with 1/8" in-tank pickup and replaces McCulloch and Homelite. Oregon replacement parts are built to meet or exceed OEM standards. Fits most saws with...
MPN: OEP30-111
High quality air filters from Oregon manufactured to exact OEM tolerances on width, height, and length to ensure a perfect fit in the filter canister. All air filters are made...
MPN: OEP30-018
This paper air filter is for 18 HP water-cooled engines and should be used with Oregon 30-329 foam pre-cleaner. Paper air filter Length: 8-3/4", Width: 3-5/8", Height: 2-3/4" Fits FD590V...
MPN: OEP45-258
This flanged wheel bearing has an outer diameter of 1-3/8" and inner diameter of 5/8". Oregon replacement parts are built to meet or exceed OEM standards. Flanged wheel bearing Fits...
MPN: OEP55-610
This air filter replaces Homelite. Oregon replacement parts are built to meet or exceed OEM standards. Pre-oiled foam air filter Thickness: 1/2'' Diameter: 1-7/8'' Fits Super 2, XL2, XL, CSB3012,...
MPN: OEP07-155
This Tygon Fuel Line is .080" and 50' and compatible with up to 10% Ethanol blend fuels. Oregon replacement parts are built to meet or exceed OEM standards. Compatible with...
MPN: OEP83-302
This oil filter is 27 micron and fits GX610, GX620, GXV340, GXC390, GXV630, GXV660, GXV670, GXV690, and BF marine engines, EB12 gen sets and H6522 compact tractors. Replaces Honda Fits...
MPN: OEP07-022
This fuel line includes a filter. Replaces Homelite. Oregon replacement parts are built to meet or exceed OEM standards. Includes filter Includes fuel tank grommet Includes return line WARNING: Cancer...
MPN: OEP07-084
This primer bulb replaces Maruyama for trimmers and blowers. Oregon replacement parts are built to meet or exceed OEM standards. Fits most CIM, C1Q, C1U Zama Carburetors. 13/16" OD Fits...
MPN: OEP30-304
This paper air filter is for 17 HP vertical overhead valve engines and fits FC540 series. Oregon replacement parts are built to meet or exceed OEM standards. Paper air filter...
MPN: OEP45-000
This ball bearing is 1-3/8" X 3/4" and replaces Snapper. Oregon replacement parts are built to meet or exceed OEM standards. 1-3/8" x 3/4" Replaces John Deere and Snapper This...
MPN: OEP49-085
This primer bulb fits model Vector series engines and replaces Tecumseh. Oregon replacement parts are built to meet or exceed OEM standards. Fits VLV-126, VLV-50, VLV-60, VLV-65, and VLV-66 model...
